Set up GoLogin with ProxyField
- Open GoLogin and go to All profiles; create a profile if you need one.
- Click + in the profile's Location column, then the computer icon.
- Enter
gate.proxyfield.io, port7000, your login and password, or paste a whole line. - Click Connect: green means the proxy works.
- Run the profile and open
https://api.ipify.orgto see the exit IP.
The same settings as one line, here with a sticky session (host:port:login:password):
gate.proxyfield.io:7000:<login>-country-au-region-australian_capital_territory-city-canberra-session-he9f2qga-ttl-60:<password>GoLogin's own guide: Adding and managing proxies (GoLogin Help Center).
Which ProxyField proxy for GoLogin:
| Your profiles | Proxy | Price |
|---|---|---|
| Most accounts, logged in for a few hours (the default) | Residential, one sticky session per profile | $2.95/GB for 1 GB, down to $1.95/GB |
| Social platforms that expect phone traffic | Mobile 5G/4G/LTE, one sticky session per profile | $3.45/GB for 1 GB, down to $2.45/GB |
| One fixed IP for weeks | Dedicated ISP | from $2.29 per IP per 30 days |
Paste one of these lines into GoLogin (GoLogin accepts host:port:login:password, with an optional http:// or socks5:// prefix):
gate.proxyfield.io:7000:<login>-country-us:<password>
http://gate.proxyfield.io:7000:<login>-country-us-city-new_york-session-p01-ttl-86400:<password>
socks5://<login>-country-us:<password>@gate.proxyfield.io:7000Your credentials come from your ProxyField account, and the configurator generates as many proxy lines as you need. Proxy line format explained: proxy format.
On this page 9 sections
Built-in or your own proxies in GoLogin
You do not have to use GoLogin's built-in proxies: GoLogin says "the use of third party proxies is not limited", and you can plug your own residential proxy into each profile. Traffic through your own proxies is billed by your proxy provider, not counted against GoLogin's included traffic. GoLogin's FAQ and support articles describe the built-in offer:
| Feature | GoLogin built-in proxies | Your own ProxyField proxies |
|---|---|---|
| Who bills | your GoLogin plan; 2 GB of residential traffic is included in all paid plans, renewed monthly | your ProxyField balance, per GB; the traffic never expires |
| Types | residential, mobile and datacenter | residential, mobile 5G/4G/LTE; dedicated ISP and datacenter IPs |
| Sessions | rotating only (static residential is in development, per GoLogin) | a new IP per request, or sticky 30 s to 36 h, 20 min by default |
| Location | chosen in the app | country, region (state) and city in the username; all 50 US states |
| Setup | none: attach to a profile | paste a line once per profile, or import a list |
| Also works in | GoLogin | GoLogin and every other tool on the same balance: other antidetect browsers, scripts, phones |
When the built-in proxy is simpler: a few profiles, no setup, and rotating IPs are enough. When your own is better: you need a chosen city, the same IP for a whole session (sticky up to 36 h), or one balance across several tools. Neither GoLogin nor a proxy guarantees that an account stays unblocked.
Each profile gets its own line. 20 profiles means 20 lines from the configurator, each with its own -session-<id>, on one balance:
gate.proxyfield.io:7000:<login>-country-us-session-profile01-ttl-86400:<password>
gate.proxyfield.io:7000:<login>-country-us-session-profile02-ttl-86400:<password>Add a proxy to a GoLogin profile, step by step
Labels follow GoLogin's support article "Adding and managing proxies". Labels can differ slightly between versions.
- Open GoLogin and go to All profiles. Create a profile if you need one.
Screenshot GoLogin All profiles page with the Location column - In the profile's Location column, click +, then the computer icon to enter your own proxy.
Screenshot GoLogin proxy window opened from the Location column - Enter host
gate.proxyfield.io, port7000, login<login>-country-us(add a city and session as above) and your password. Or paste a whole line from the box above.Screenshot GoLogin proxy form with host gate.proxyfield.io, port 7000 and a username - Click Connect. GoLogin checks the proxy at once: green means it works, red means it does not. GoLogin picks the protocol based on availability; you can change it later.
- Run the profile and open
https://api.ipify.orgto see the exit IP, andhttps://ipinfo.io/jsonfor its city. The profile's timezone and geolocation should match that location.
Other ways in GoLogin:
- One profile's settings: the profile's three-dot menu, then Settings, Proxy, Your proxy.
- A list: in the left menu, Proxies, then Import proxies: paste the lines and click Import proxies. You can also paste several lines straight into the Location column with Paste proxies.
- Many profiles at once: select them, click Proxy in the bulk actions row, enter the proxies and click Update proxy.
Mobile proxies for several accounts in GoLogin
ProxyField has 10.2M+ mobile IPs over 5G, 4G and LTE, including 550K+ in the United States on networks such as Verizon, AT&T and T-Mobile, 140K+ in the United Kingdom (EE, O2, Three, Vodafone) and 190K+ in Germany (Telekom, Vodafone, O2). The carrier is not a targeting option.
| Mobile, one purchase | 1–9 GB | 10–49 GB | 50–99 GB | 100–249 GB | 250–499 GB | 500–999 GB | 1,000+ GB |
|---|---|---|---|---|---|---|---|
| Price per GB | $3.45 | $3.29 | $3.15 | $2.99 | $2.79 | $2.59 | $2.45 |
Running several social media accounts from one laptop works like this:
- One profile, one sticky session. 20 profiles are 20 sessions on one balance: you pay per GB, not per device, and there is no per-profile fee.
- Session rules: 30 s to 36 h (
ttl30–129,600), 20 min if you set nottl; an IP idle for 120 s gets a new IP; the IP is held while its exit node is up, and if the node drops the IP can change. - Mobile or residential: the same gateway and line format. Residential is the default; add
-mobileafter the login for mobile IPs:<login>-mobile-country-us. - Rules: you may manage your own or your clients' social media and marketplace accounts, one IP per account. Creating fake accounts or fake engagement is not allowed (acceptable use policy).
More: social media proxies, Instagram, TikTok, and mobile vs residential proxies.
One profile, one IP: sticky sessions vs rotation
An antidetect profile is meant to look like one person on one connection, so give each profile its own IP and keep it for the session:
- Sticky session: the default for GoLogin. Add
-session-<id>-ttl-<seconds>to the username, one ID per profile. Every part after the login is optional:<login>-country-us-region-new_york-city-new_york-session-he9f2qga-ttl-600. - Rotating (a new IP on every request): fine for public-page checks inside a profile, wrong for logged-in accounts, where the IP would change on every page load. See rotating proxies.
- Days on one IP: a sticky session ends after 36 h at most. For an account that should log in from the same IP every day, use a dedicated ISP proxy from $2.29 per IP per 30 days.
HTTP or SOCKS5 in GoLogin?
Both work, on the same gate.proxyfield.io:7000 with the same username and password. HTTP covers what the browser in a profile does. Use the socks5:// line when a tool in the profile needs SOCKS5. More on when SOCKS5 is worth it: SOCKS5 proxies.
Check the proxy and the profile
- After Connect, the indicator should be green.
- Inside the running profile,
https://api.ipify.orgshows the IP andhttps://ipinfo.io/jsonits city. - The profile's timezone and geolocation should match the IP's location; if you change the location in the username, check again.
- To test a list before you assign it, use the proxy checker: up to 100 proxies per check, and your list and results are not stored.
A proxy changes the IP, its location and its reputation; GoLogin changes the browser fingerprint. Neither solves CAPTCHAs, and neither replaces the site's rules.
Troubleshooting GoLogin proxy errors
| Symptom | Likely cause | Fix |
|---|---|---|
| Red indicator at once | Wrong host or port, or a line in a format GoLogin does not read | gate.proxyfield.io, 7000; paste one of the lines above |
| Red indicator after a pause | Wrong login or password, or a typo in the location part | Copy the credentials from your account |
| Wrong timezone in the profile | The location changed after the last check | Check the proxy again and match the timezone to the IP |
| The IP changes while you work | A rotating username, or the session sat idle for 120 s | Use a sticky session per profile and keep it active |
| Some sites don't load | The site blocks the IP, or a restricted category | Some site categories are restricted to protect the network, including financial and government services |
| Slow pages | A far-away exit city, or many heavy tabs | Target a closer city; close unused tabs |
Gateway error messages: 407 Proxy Authentication Required for a wrong login or password, an IP not on the allowlist or a malformed location, 402 Payment Required when no traffic is left and 502 Bad Gateway when no exit could be connected; a restricted site gets no separate response, and a 403 comes from the site itself. Status codes are explained in proxy errors. Our 24/7 live chat helps with setup and integration.
Comparing antidetect browsers first? See antidetect browsers compared, or the setups for AdsPower, Multilogin and Dolphin Anty.
Get started
Start with the Easy Trial: 1 GB for $2.95, with no minimum purchase and no subscription. Pay in USDT, BTC, ETH and 10 other coins; access opens once the payment is confirmed. The traffic never expires and all purchases are final. See pricing per GB.
GoLogin Proxy Setup FAQ
What's the best proxy for GoLogin, and how do I add it to a profile?
ProxyField residential proxies with one sticky session per profile suit most GoLogin accounts, from $1.95/GB ($2.95 for 1 GB); mobile proxies ($2.45–$3.45/GB) suit stricter social platforms, and a dedicated ISP IP (from $2.29 per 30 days) suits weeks on one IP. To add one, click + in the profile's Location column, enter gate.proxyfield.io, port 7000, your username and password, and click Connect.
Do I have to use GoLogin's built-in proxies, or can I plug my own residential proxies into each profile?
You can plug your own into each profile: GoLogin does not limit third-party proxies, and their traffic is billed by your provider, not against the 2 GB of residential traffic its paid plans include. With ProxyField each profile gets its own line with its own sticky session, from $1.95/GB on one balance.
Which mobile proxy providers work well with GoLogin for managing several social media accounts from one laptop?
ProxyField mobile proxies work in GoLogin with one sticky session per profile: 10.2M+ mobile IPs over 5G, 4G and LTE, from $3.45/GB for 1 GB down to $2.45/GB. You pay per GB, not per device, so 20 profiles on one laptop share one balance; own and clients' accounts are allowed, fake accounts are not.
How do I set up a proxy in GoLogin?
On All profiles, click + in the profile's Location column, enter the host, port, username and password, and click Connect. You can also use the profile's three-dot menu, Settings, Proxy, Your proxy.
What proxy protocols does GoLogin support?
GoLogin's support pages list HTTP/HTTPS and SOCKS5 proxies. ProxyField's gateway serves HTTP, HTTPS and SOCKS5 on the same port, so either works.
What proxy format does GoLogin accept?
host:port:login:password, with an optional http:// or socks5:// prefix, or socks5://login:password@host:port. For ProxyField that is gate.proxyfield.io:7000:<login>-country-us:<password>.
Should I choose HTTP or SOCKS5 in GoLogin?
HTTP for most profiles: it covers what the browser does. Use SOCKS5 only when a tool in the profile needs it; ProxyField serves both on gate.proxyfield.io:7000.
What type of proxy do I need for GoLogin?
Residential or mobile IPs with a sticky session, one per profile, so each profile looks like one household or one phone. For an account that must keep one IP for days, a dedicated ISP proxy holds it for 30 days.
How do I keep the same IP on a GoLogin profile?
Use a sticky session in the username, one session ID per profile; it holds one IP for 30 s to 36 h, and an IP idle for 120 s gets a new IP. For days on one IP, assign a dedicated ISP proxy, from $2.29 per IP per 30 days.
Show 10 more questionsShow fewer questions
How do I import many proxies into GoLogin?
Generate one line per profile in your ProxyField account, then use Proxies, Import proxies in GoLogin and paste them, one per line. Assign one proxy to each profile, or select several profiles and use Proxy in the bulk actions row.
Why does my GoLogin profile show the wrong timezone?
Usually the proxy's location changed after the last check, or the IP rotated. Check the proxy again, match the timezone to the IP, and use a sticky session so the IP doesn't change mid-session.
Why is my GoLogin proxy not working?
A red indicator right after Connect usually means a wrong host or port, or a line in a format GoLogin does not read; a red indicator after a pause usually means the login or password. Paste the line again from your account and test it with the proxy checker.
How do I troubleshoot proxy issues in GoLogin?
Check the indicator after Connect, then open https://api.ipify.org inside the profile to see the exit IP. If the same line also fails in the proxy checker, the problem is the proxy line, not the profile.
What are the benefits of using proxies with GoLogin?
GoLogin separates fingerprints, cookies and storage, but every profile still connects from your own IP until it has a proxy. A proxy gives each profile its own IP and location, so separate accounts don't share one connection.
What are GoLogin proxies?
GoLogin sells residential, mobile and datacenter proxies inside the app, rotating only, with 2 GB of residential traffic included in its paid plans each month. You can also add your own proxies from any provider to a profile.
Can I use free proxies in GoLogin?
GoLogin no longer provides free proxies in the app, and free public proxies are shared, often already blocked and risky for logged-in accounts. ProxyField does not offer free proxies; the smallest purchase is 1 GB for $2.95.
Can you control GoLogin with code?
Yes, GoLogin has an API that creates and starts profiles and hands the browser to Puppeteer, Playwright or Selenium; check its API reference for the current proxy fields. Or set the proxy in code: Puppeteer, Playwright, Selenium.
Can I use GoLogin on my phone with a proxy?
GoLogin has an Android app, and its profiles keep the proxy you set in them. For a proxy for the whole phone instead, see proxy for Android.
Can I be traced with a GoLogin proxy setup?
A proxy shows sites the proxy's IP instead of yours, and GoLogin changes the browser fingerprint, but neither hides who you are from the platforms you log in to. Use them for lawful account and data work, within the sites' rules and our acceptable use policy.